Now more and more people are using glue filling machines, but it should be noted that the equipment needs to be cleaned during use. If it is not cleaned, the glue inside will solidify, and it will not be operable when working the next day. As the operator of the automatic glue filling machine, you must master the correct cleaning method and follow the correct operating procedures, so that the glue filling machine can be cleaned. The following is a small introduction to how to clean the glue filling equipment. In the cleaning of automatic glue filling machine, first of all, we must figure out what glue is used inside, because different types of glue will solidify at different speeds, so the cleaning operation procedures will be very different. For example, some glue filling machines use glues that tend to solidify at room temperature during operation. When cleaning this kind of glue filling machine, you should first release all the remaining glue inside, and then add an organic solvent for cleaning after the release. The organic solvent is usually industrial alcohol. Put the industrial alcohol into the inside to melt the remaining glue, and then blow it dry with an air gun, so as to achieve a good cleaning effect. In addition, some glues may be liquid at room temperature, so this type of glue is relatively easy to clean. There are also some glue dispenser equipment with special automatic cleaning programs. As long as the automatic program is turned on, the cleaning operation can be carried out automatically, so there is no need for manual operation. The above is about the cleaning method of automatic glue filling machine. It must be noted that some types of glue may not be easy to clean. After putting the organic solvent in, it cannot be cleaned immediately, but needs to be soaked for a period of time to clean the glue residue inside. In order to ensure the proper use of the equipment, the filling machine must be cleaned every day after using the equipment. At the same time, the internal condition of the filling machine must be checked every day before going to work. If there is glue residue or glue, the filling machine cannot be opened at this time and needs to be cleaned first. If the machine is opened without cleaning, it is likely to cause internal blockage, affecting the subsequent production, and easy to cause glue waste.