I believe that people who often work in the fields of electronic components and transformers are familiar with the application principles and functions of automatic precision dispensers. Many technology enthusiasts are therefore in-depth research on the information about the cabinet dispenser equipment, and now I will briefly explain how the dispenser should be cleaned after dispensing:

1. For anaerobic glue and quick-drying glue, it is better to clean with water first

The automatic precision dispenser may leave different glues after dispensing. If different glues are mixed together, it may affect the next dispensing operation if they are not cleaned in time. Especially for curing glues such as anaerobic glue and quick-drying glue, users need to drain the unused glue and then clean it with water. If it is not clean, then it needs to be cleaned with organic solvents for deep cleaning.

2. Use organic solvents to clean residual glue

According to official information analysis, the automatic precision dispensing machine can help electronic devices, switches, etc. to achieve automatic dispensing operations. After the dispensing operation, organic solvents can be used to clean the residual glue, because most of the residual glue is easily soluble in organic solvents, and the dispensing machine can continue the dispensing operation after being cleaned by organic solvents.

3. Blow the organic solvent and glue together with an air gun

The dispenser needs to pour thinner or industrial alcohol into the machine during the cleaning operation, so as to facilitate the organic solvent to dissolve the glue deeply. After dissolving, blow it with an air gun. This is to prevent the glue from solidifying in the valve, which will cause difficulties in the subsequent cleaning of the automatic precision dispenser.

Automatic precision dispensers have gradually stepped onto the fast lane of rapid development, and the application performance of related automatic dispensers has gradually become the object of eager attention. According to some shared feedback, it is indicated that the cleaning operation of the dispenser equipment after dispensing, if it encounters anaerobic glue and quick-drying glue, it should be cleaned with water first, and then the residual glue with organic solvent. Wait for the organic solvent and glue to enter After the machine is blown open with an air gun.