Dispensing systems Nozzles is an all-round system for medium to high viscosity media. It is suitable for the application of a wide range of fluids, such as:
1.SMT Adhesives
2.Filled Conductive Glues
3.Silver Conductive Adhesives
4.Solder Pastes
5.Solder Fluxes
6.Silicones
7.LED-phosphor
8.Underfill materials
9.Hot Melts.
Dispensing systems Nozzles Major Advantages
Fast: Dispensing nozzles Opening and closing of the valve for max needle lift with more than 3000 Hz (Depending on application and Media), nonstop operation with up to 1000 Hz.
Versatile: Dispensing nozzles Freely adjustable parameter settings allow to customize the jet properties to the dispense fluid properties. Electronic control unit allows change of dispensing parameters without delay. Also compatible for low or medium viscous media (if the tappets are switched often or if the dispensing amounts are very small).
Precise: Dispensing nozzles High repeatability of drop-to-drop dispensing volume for media of all viscosity. Dispensing into cavities, grooves and irregular surfaces.
Powerful: Dispensing nozzles Converting the force of the latest generation piezo through sophisticated mechanics, the system can jet highest viscosity media with pressures of up to 1.000 bar.
Flexible: The modular design of the Nozzles and tappets for micro dispensing systems allows user defined configurations for various applications. You can adjust the same system to very different process and fluid parameters with the exchange of just a few parts. You can use a number of different nozzle units for a wide range of media and dot sizes. For the optimum performance it is possible to choose from different tappet geometries. You can choose from several different component materials, which allows for virtually unlimited media compatibility.
Various types Dispensing system tappet nozzle
Since there are many types of nozzles and Tappet used in dispensing machines, and the brands of dispensing machine Nozzles and Tappet are also different,some product dispensing nozzles and Tappet are displayed on the website. If you want to know about the nozzle and Tappet or dispensing valve system you need,please click WhatsApp or Telegram to contact customer service staff.
Precision Tappet and Nozzles for Dispensing System advantages mainly include:
1. Non-contact injection: improves the accuracy and yield of dispensing, suitable for precision dispensing process.
2. High-speed spraying: can continuously operate high-frequency spraying glue, suitable for high-speed automated production lines.
3. Wide applicability: it can handle medium to high viscosity liquids and is suitable for a wide range of dispensing scenarios.
4. Precise control: by changing the driving voltage amplitude, frequency, duty cycle and other parameters, it realizes precise control of the glue droplet spraying performance.
5. Easy maintenance: simple structure, easy to disassemble and clean, reducing maintenance costs.
These advantages make the Dispensing System nozzle firing pin widely used in electronic manufacturing, LED packaging, medical equipment and other fields.
Introduction to precision tappets and nozzles
1.Precision tappets and nozzles for dispensing systems are divided into two types (contact nozzles and non-contact nozzles).
2.Non-contact nozzles are subdivided into pneumatic nozzles and piezoelectric nozzles.
This chapter describes pneumatic nozzles, in which the tappet is pushed by air pressure to hit the nozzle.
Different series of dispensing system nozzles
Different series of dispensing system tappets
Dispensing nozzle and push rod manufacturing capabilities:
Nozzle/tapped rod/screw hardware processing Customized processing according to customer needs
Materials: tungsten steel, stainless steel, zirconia ceramics, tool steel, etc.
Nozzle accuracy: The minimum inner hole can reach ≥Ø0.025mm (OD≥Ø0.03mm), the accuracy is ±0.0005mm (TOL≥0.5um), the concentricity and roundness can reach up to ±0.0005mm (0.5um),
Nozzle annual output can reach: 500,000 pieces
Customized products (processed by drawing or sample), delivery time is completed within 5 to 10 working days
If all hardware accessories cannot meet product requirements or have problems, or are not genuine, or the material is poor, etc., our company promises unconditional refund and return.
Nozzle application: Suitable for controllable flow and high-speed dispensing of various adhesives such as surface mount glue, conductive silver paste, LED phosphor glue, IC packaging glue, bottom filling glue, UV glue, red glue, grease, sealant, silicone, epoxy glue, surface coating glue, solder paste, etc.
The size is measured with a 40x microscope before shipment, and the polishing state is confirmed at the same time. The two sides of the plane do not step on the edge and jump.
This site provides push rods and nozzles of different brands, supports product customization, and the raw materials used are all high-hardness tungsten steel from Japan and the United States.
Dispensing system nozzle and tappet product application video display
The dispensing valve system should be used in SMT PCBA products