Nozzle needle seals for mingseal protec dispensing head
Due to the wide variety of specifications of dispensing head nozzle needle parts, only some dispensing parts are displayed. If you need spare parts such as dispensing head nozzle push rod, please contact customer service.
Below are the specification numbers of some mingseal dispensing head nozzle needle parts
mingseal nozzle seat heating O-ring MF-301-2
mingseal nozzle (flat head) VZ07 (flat head)
mingseal nozzle seal seat PL-305
mingseal integrated PEEK Luer connector adapter FL-317
mingseal syringe adapter ZJ-5
mingseal flow channel seat heating O-ring MF-501-2
mingseal nozzle (conical) VZ07-L1 (conical)
mingseal nozzle locking nut PL-307
mingseal Luer connector adapter PL-308
mingseal firing pin return spring FL-301
mingseal firing pin guide seat PL-302
mingseal locking screw PL-309
mingseal spring washer PL-310
mingseal O-type firing pin seal MF-121-1
mingseal flat washer PL-311
mingseal nozzle sleeve fixing block PL-312
mingseal tappet return spring PL-301
mingseal gasket PL-303
mingseal tappet guide seat PL-302
mingseal tappet seal MF414-2
mingseal nozzle seal seat PL-305 (PL-306)
mingseal nozzle seat heating O-ring MF301-2
mingseal runner seat heating O-ring MF-501-2
mingseal O-type tappet seal MF-121-1
mingseal stack brake P-0879
Below are the specification numbers of some Protech dispensing head nozzle needle parts
1.1.0393 Deep slot nozzle - 0.15 - Portec dispensing
1.1.0394 Deep slot nozzle - 0.20 - Portec dispensing
1.1.0419 Deep slot nozzle - 0.30 - Protec dispensing
1.1.0725 Tappet - 0.7 - Portec dispensing
1.1.1479 Deep slot nozzle - 0.12 - Protec dispensing
1.1.1665 Shallow slot nozzle - 0.1 - Protec dispensing
1.1.1754 Tappet - 1.5 - Portec dispensing
1.1.1784 Deep slot nozzle - 0.1 - Protec dispensing
1.1.1796 Tappet - 2.0 - Protec dispensing
1.1.1797 Tappet - 2.0 - Protec dispensing
Seal consumables for Mingseal Protec dispensing tips
Mingseal dispensing valve is known for its high precision, stability and durability. Mingseal dispensing valve is widely used in many fields such as electronic manufacturing, automotive industry, medical equipment, LED lighting, etc. The following is a comprehensive and detailed introduction to Mingseal dispensing valve.
1. Mingseal dispensing product types
1. Mingseal needle dispensing valve
Suitable for high-precision, small-dose dispensing operations, widely used in electronic components, medical equipment and other industries.
2. Mingseal diaphragm dispensing valve
Adopting a contactless design, it is suitable for dispensing applications with special requirements for the medium, such as UV glue, anaerobic glue, etc.
3. Mingseal jet dispensing valve
Non-contact dispensing is achieved through high-speed switching, suitable for occasions requiring high-speed and high-precision dispensing, such as chip packaging, LED packaging, etc.
4. Mingseal screw dispensing valve
High-precision quantitative dispensing is achieved through screw drive, suitable for dispensing of viscous media, such as silicone, epoxy resin, etc.
2. Main features of mingseal dispensing
1. High precision
The dispensing valve adopts precision machining and advanced control technology to ensure the consistency and accuracy of each dispensing, and the minimum dispensing volume can reach nanoliters.
2. Stability
The design focuses on stability. By optimizing the flow channel design and material selection, it effectively reduces bubbles and glue leakage, ensuring the stability of long-term operation.
3. Durability
The selection of high-quality materials is corrosion-resistant and wear-resistant, which prolongs the service life of the equipment and reduces maintenance costs.
4. Easy maintenance
The structural design is simple, easy to disassemble and clean, and convenient to maintain, which effectively improves work efficiency.
3. Application fields of mingseal dispensing
1. Electronic manufacturing
Used for dispensing operations in SMT patches, PCB assembly and other processes, such as solder paste dispensing, protective paint coating, etc.
2. Automotive industry
Used for sealing, bonding and potting of automotive electronic components, such as sensors, control units, etc.
3. Medical machines
Suitable for assembly and packaging of medical devices, such as catheters, sensors, etc., to ensure biocompatibility and sterility. 4. LED lighting
Used for dispensing in LED chip packaging and lamp assembly, such as phosphor dispensing, potting glue application, etc.
4. Mingseal dispensing technical parameters
The technical parameters of Mingseal dispensing valves will vary according to the specific model. The following are some common parameters:
1. Dispensing accuracy: ±0.01mm
2. Minimum dispensing volume: 0.001ml
3. Working pressure: 0.1-0.7MPa
4. Applicable media: UV glue, epoxy resin, silicone, anaerobic glue, etc.
5. Operating temperature: 0-40°C
6. Material: stainless steel, aluminum alloy, polymer materials, etc.
5. Typical product introduction
Piezoelectric valve injection system KPS2000
The KPS2000 series piezoelectric injection valve is a new generation of high-speed, precision, non-contact injection system that can handle low, medium, high viscosity and ultra-high viscosity media; depending on the application medium, this type of piezoelectric valve has UV type, corrosion-resistant type, PUR type, anti-corrosion type and other configurations available.
Features:
1. Stability and consistency of glue spraying
The striker guide seat is directly connected to the flow channel thread, and the coaxial and guide design of the guide seat and the flow channel is increased; the coaxiality of the striker and the nozzle is improved to ensure continuous and stable glue spraying.
The valve body injection force increased by 20% year-on-year, which can support higher viscosity glue (up to 500,000cps).
2. Quantitative control capability of parameters
The adjustment component increases the scale quantification, and each scale adjustment amount is 0.01mm.
3. Faster process recovery capability
Auxiliary enhanced ADJ calibration function, repeatability 0.01mm.
After conventional cleaning and assembly, it can be directly sprayed without ADJ calibration, and the process recovery time is less than 2 minutes.
4. Lower use cost
The integrated design of the nozzle seat reduces 1 sealing ring + 1 nozzle sealing seat + 1 installation tool, reducing maintenance and use costs.
Keywords and names of dispensing nozzle
1. Dispensing nozzle 2.Dispensing valve 3. High precision nozzle 4.Needle nozzle 5. Jetting nozzle 6. Fan nozzle 7. Dot nozzle 8.Corrosion-resistant nozzle 9. Wear-resistant nozzle 10.Stainless steel nozzle 11. Tungsten carbide nozzle 12. Ceramic nozzle 13. PTFE nozzle 14. Precision dispensing 15. Automated dispensing 16. Flow control 17. Adhesive viscosity 18. Dispensing accuracy 19.High-speed dispensing 20.Industrial dispensing 21. Electronic component dispensing 22. Automotive part dispensing 23. Medical device dispensing 24. Packaging dispensing 25. Maintenance 26. Replacement parts 27. Dispensing efficiency 28. Nozzle clogging 29. Dispensing system 30. Dispensing process
Nozzle: Dispensing nozzle, Dispensing tip, Needle tip, Precision nozzle, Glue nozzle, Adhesive nozzle, Dispensing head, Fluid nozzle, Fluid tip, Syringe tip, Jet nozzle, Valve nozzle, Dosing nozzle, Drip tip, Precision dispensing nozzle, Fine-tip nozzle, Spray nozzle, Dispensing applicator, Nozzle assembly, Non-drip nozzle.
Tappet: Dispensing tappet, Plunger, Pump tappet, Actuator, Dispensing piston, Syringe plunger, Dosing plunger, Pressure tappet, Piston tappet, Valve tappet, Fluid control tappet, Pneumatic tappet, Servo tappet, Dispensing pump plunger, Dosing pump tappet, Actuating rod, Precision tappet, Metering plunger, Drive rod, Displacement tappet.
.jpg "Nozzle needle seals for mingseal protec dispensing head")
.png)
skype
whatsapp
telegram
