The automatic dispensing machine with excellent performance has three-dimensional function, programmable dispensing route, and the easy-to-use automatic dispensing machine can dispense and spray the product, and the product has a good glue coating effect, which can ensure that there is no leakage. Not drawing. However, before applying glue to the product, notice that these three dispensing details can significantly and effectively improve the glue application effect of the automatic dispensing machine. The following introduces three details that need to be paid attention to when using an automatic dispenser.

1. Pay attention to the selection of the dispensing valve

The automatic dispensing machine is mainly used for dispensing and coating the product. This working mode requires the cooperation of the dispensing valve to be realized, so the selection of the dispensing valve type is a very important detail. The automatic dispensing machine can be equipped with many types of dispensing valves. In addition to the spray valve, the glue application effect can also be improved by assembling the suction dispensing valve. The suck-back dispensing valve has a good glue suck-back effect. The automatic dispensing machine is equipped with a suck-back dispensing valve, which can suck back the glue very well, avoiding the automatic dispensing machine when it is working. Problems such as glue leakage affect the glue application effect.

2. Pay attention to the quality of the applicable glue

In addition to the correct selection of the suck-back dispensing valve can improve the glue application effect of the automatic dispensing machine, the quality of the glue used will also affect the dispensing effect. Then the user should use the automatic dispensing machine to store the glue before the product , First check how good the overall quality of the glue is. If it is found that there are too many impurities in the glue used, it is better to replace it again to avoid the possibility of dispensing problems.

3. Pay attention to the setting of dispensing parameters

Before dispensing the product, you can set the dispensing path, working parameters, etc. through the handheld teach pendant according to the actual needs of the product store. The automatic dispenser is equipped with a hand-held teach pendant. When setting the working parameters, it needs to be adjusted according to the viscosity of the glue used and the product's demand for glue output. At the same time, it is also necessary to adjust the suction pressure of the suction dispensing valve. Avoid the phenomenon of glue drawing that affects the glue application effect of the automatic dispensing machine.

In a word, the three details that need to be paid attention to when using an automatic dispenser are: pay attention to the selection of the dispensing valve, pay attention to the quality of the applicable glue, and pay attention to the setting of the dispensing parameters. The specific content has been introduced above. . Therefore, industries such as the coating of automotive mechanical parts and cell phone battery packaging that involve dispensing needs can rest assured to purchase and use automatic dispensers with sufficient supply.