JET-8600 dispensing head

JET-8600 dispensing head

< introduce>

JET-8600 pneumatic jet dispensing head is a non-contact dispensing process that avoids collision between the needle and the product. The extremely small dispensing amount is suitable for dispensing in narrower spaces without Z-axis movement. The maximum dispensing speed is 200 points per second. , which is more than 3 times faster than traditional dispensing, and can achieve high-speed and controllable volume dispensing of multiple fluids and adhesives.

< Dispensing head features>

• Non-contact spraying

• high speed

Z-axis movement is required, and the jet speed is up to 200 points/second, which is 3~7 times that of contact dispensing;

• High precision

The minimum dispensing volume is 5nl, and the consistency is higher than that of contact dispensing;

• High flexibility

Non-contact, avoiding the collision between the needle and the product; Very small dispensing volume, suitable for more compact spaces.

• Low maintenance and long life

Advanced structure design, daily cleaning and maintenance is simple and easy; the most advanced nano wear-resistant material accessories, which are more than 20 times the life of ordinary materials.

• Have independent intellectual property rights

• Runner and nozzle thermostat system to ensure the consistency of glue temperature

• Independent adjustment of preload and stroke

< Focus on application>

• Underfill • Pin Encapsulation • Precision Coating • Bonding • Sealing • Potting • Dam & Filling Suitable for fluids

• Underfill glue • Sealant • Epoxy glue • UV glue • Conductive glue • Silver paste • Red glue

• Surface Mount Adhesives • Coating Adhesives • Inks • Silicone Oils • Biological Enzymes

< Jet valve controller >

•The touch screen controls the piezoelectric injection valve and dispensing system, and supports the MES system with powerful functions, safety and reliability.

• The touch screen adopts graphic control mode, and the composition of dispensing system components and control display functions are displayed in graphic form, which is concise, intuitive and clear.

< Nozzle heater >

•The nozzle needs to be heated to the proper temperature before dispensing. The heating device adopts a first-level heating method.

• Heating at the nozzle keeps the colloid at a constant temperature to meet the best performance of the colloid.

< Application field >

Camera module bonding, special device bonding and potting, soft board bonding, main circuit board bottom filling, frame bonding, fingerprint button module bonding, sensor control unit bonding, power potting .

< Specifications>