MMG18029601 APJ1006 for AXXON dispensing nozzle needle seal
Due to the wide variety of AXXON dispensing head nozzle needle parts, only some dispensing parts are shown. If you need dispensing head nozzle needle seals and other spare parts, please contact customer service.
Below are the specification numbers of some AXXON dispensing head nozzle needle parts.
AXXON Dispensing nozzles：
AXXON Dispensing APJ1006-6-6 600um-3.5(J): MG18052901 Dispensing nozzle
AXXON APJ1006-6-6 600um-3.5(J): MG18052901
AXXON MMG18005701 APJ1006-3 Dispenser nozzle 100um (APJ)
AXXON MMG18025901 APJ1006-3-2 Dispenser Nozzle 100um(C)(APJ)
AXXON MMG18007401 APJ1006-9 Dispenser Nozzle 100um-2.5 (APJ)
AXXON MMG18012201 APJ1006-15 Dispenser Nozzle 100um-3.5 (APJ)
AXXON MMG18016301 APJ1006-17-1 Dispenser Nozzle 100um-4.5 extension nozzle (APJ)
AXXON MMG18007701 APJ1006-12 Dispenser Nozzle 100um-5(J)(APJ)
AXXON MMG18016701 APJ1006-12-1 Nozzle 100um-5(S) (APJ)
AXXON MMG18049901 APJ1006-12-2 Nozzle 100um-6 (APJ) PJ1006-7 Nozzle 125um (APJ)
AXXON MMG18010901 APJ1006-7-1 Ceramic Nozzle 125um (APJ)
AXXON MMG18007501 APJ1006-10 Nozzle 125um-2.5 (APJ)
AXXON MMG18019501 APJ1006-10-1 Nozzle 125um-4.5 (APJ)
AXXON MMG18065301 Nozzle 300um-4.5
AXXON MMG18053301 Nozzle 100um-1.6
AXXON MMG18028101 Tungsten steel striker, shaft, 2.35mm tungsten steel striker
AXXON MMG18024801 Strike guide ring, shaft, 2.35mm
AXXON MMG09032001 2.35 guide ring high temperature resistant O-ring
AXXON MMG09020401 Vermes seal 3200/3250 dispensing head common
AXXON MMG18028901 Vermes3200 valve fluid box, shaft, model Vermes3200
AXXON ARJ1006-8-1 Ceramic nozzle 150um (APJ)
AXXON APJ1006-9 Nozzle 100um-2.5 (APJ)
AXXON APJ1006-10 Nozzle 125um-2.5 (APJ)
AXXON APJ1006-15 Nozzle 100um-3.5 (APJ)
AXXON APJ1006-11 Nozzle 200um-5 (APJ)
AXXON APJ1006-12 Nozzle 100um-5 (APJ)
AXXON APJ1006-12-1 Nozzle 100um-5 (S) (APJ)
AXXON APJ1006-13 Nozzle 150um-2.5 (APJ)
AXXON APJ1006-14 Nozzle 75um-2.5 (APJ)
AXXON APJ1006-17 Nozzle 80um-4.5 extended nozzle (APJ)
AXXON APJ1006-17-3 Nozzle 80um-4.5 (15) extended nozzle (APJ)
AXXON APJ1006-17-1 Nozzle 100um-4.5 extended nozzle (APJ)
AXXON APJ1006-17-2 Nozzle 125um-4.5 extended nozzle (APJ)
AXXON APJ1007 Spring
AXXON APJ1008 Support rod (metal) (APJ)
AXXON APJ1049 Support rod (plastic) (APT)
AXXON APJ1021-1-3 0.75mm gemstone striker (APJ)
AXXON APJ1021-2 1.0mm special striker (APJ)
AXXON APJ1021-2-1 1.0mm special striker (APJ)
AXXON APJ1021-2-2 1.0mm ceramic striker (APJ)
AXXON APJ1021-2-3 1.0mm gemstone striker (APJ)
AXXON APJ1021-6 1.0mm extended ceramic striker (APJ)
AXXON APJ1021-8 1.25mm extended ceramic striker (APJ)
AXXON APJ1021-5 1.25mm special striker (APJ)
AXXON APJ1021-7 1.5mm extended ceramic striker (APJ)
AXXON APJ1021-3 1.5mm special striker (APJ)
AXXON APJ1021-3-1 1.5mm special striker (APJ)
AXXON APJ1021-3-2 1.5mm ceramic striker (APJ)
AXXON APJ1021-3-3 1.5mm gem striker (APJ)
AXXON APJ1021-4 2.0mm special striker (APJ)
AXXON APJ1021-4-1 2.0mm special striker (APJ)
AXXON APJ1021-4-2 2.0mm ceramic striker (APJ)
AXXON APJ1021-4-3 2.0mm gem striker (APJ)
AXXON APJ1053 valve body filter head (APJ)
AXXON MMG18007601 APJ1006-11 Nozzle 200um-5 (APJ)
AXXON MMG18029601 APJ1006-11-4 Nozzle 200um-20 (APJ)
AXXON MMG18053401 APJ1006-11-6 Nozzle 200um-7(1)(APJ)
AXXON MMG18053501 APJ1006-11-7 Nozzle 200um-7(2)(APJ)
AXXON MMG18053601 APJ1006-11-8 Nozzle 200um-7(3)(APJ)
AXXON MMG18053701 APJ1006-11-9 Nozzle 200um-7(4)(APJ)
AXXON MMG18031501 APJ1006-19 Nozzle 250um (APJ)
AXXON MMG18005901 APJ1006-5 Nozzle 300um
AXXON MMG18050801 APJ1006-5-2 Nozzle 300um-3.5(APJ)
AXXON MMG18065301 APJ1006-5-4 Nozzle 300um-4.5 (APJ)
AXXON MMG18065901 APJ1006-5-6 Nozzle 350um-3.5(JV)(APJ)
AXXON MMG18006001 APJ1006-6 Nozzle 400um
AXXON MMG18031001 APJ1006-6-1 Ceramic Nozzle 400um
AXXON MMG18050901 APJ1006-6-2 Nozzle 400um-3.5(APJ)
AXXON MMG18052601 APJ1006-6-3 Nozzle 500um-3.5 (APJ)
AXXON MMG18052701 APJ1006-6-4 Nozzle 500um-3.5(J)(APJ)
AXXON MMG18012701 APJ1006-16 Nozzle 600um
AXXON MMG18052801 APJ1006-6-5 Nozzle 600um-3.5 (APJ)
AXXON MMG18010201 APJ1021-1-2 0.75mm Ceramic Dispenser Pins (APJ)
AXXON MMG18005101 APJ1021-1 0.75mm Firing Pin for Dispenser(APJ)
AXXON MMG18005201 APJ1021-2 1.0mm Firing Pin for Dispenser(APJ)
AXXON MMG18010501 APJ1021-2-2 0.75mm Ceramic Dispenser Pins (APJ)
AXXON MMG18014501 APJ1021-6 1.0mm Extended Ceramic Firing Pin
Below are some pictures of dispensing nozzles and tappet parts such as AXXON VERMES NORDSON GK-PRETECH ANDA.
Dispensing nozzle and tappet manufacturing capabilities:
Nozzle/tappet/screw hardware processing method: customized according to drawings or samples based on customer needs
Nozzle aperture accuracy can reach: 0.03mm
Nozzle finish can reach mirror surface: Ra0.1
Nozzle concentricity: 0.002mm
Nozzle hardness: 85-95 HR
Using temperature: -55 to 260 degrees Celsius
Processing method: precision grinding
Dispensing nozzle materials: tungsten steel, ceramics, diamond, carbide, stainless steel and other materials.
Features of AXXON dispensing head
Unique nozzle, flow channel and feeding system ensure the consistency of solder paste spraying
Piezoelectric principle, high spraying frequency, dispensing frequency up to 550Hz, minimum dot diameter reaches 0.23mm
New striker and nozzle structure design, maximize output force
The contact gap between the striker and the nozzle is adjustable, and the spraying parameters are convenient and reliable to adjust
Online disassembly, fast maintenance and cleaning, reducing downtime
Non-contact, eliminating Z-axis movement, can achieve high-speed dispensing operations for smooth or uneven surfaces
Maximum operating frequency (settable): ~550 cycles/s
Optimal feed pressure: 0~0.3 Mpa
Minimum working air pressure: ——
Minimum dot diameter: 0.165 mm
Optimal viscosity range: 1~200000cps
Sprayability: can meet various room temperature dispensing requirements
MFocus on applications: silicone application, silver paste application, precision coating, surface mount-red glue, hot melt adhesive bonding and other applications of higher viscosity glue
Suitable fluids: hot melt adhesive, epoxy resin, UV glue, silicone, silver paste, red glueaximum heating temperature: 200℃
AXXON dispensing needle nozzle comprehensive introduction
1. AXXON dispensing head working principle
The needle nozzle controls the outflow of liquid through the up and down movement of the needle. When the needle moves downward, the nozzle mouth opens and the liquid is squeezed out; when the needle rises, the nozzle mouth closes and the liquid stops flowing out. This design can achieve precise control of liquid dispensing and avoid the problem of over- or under-dispensing.
2. AXXON dispensing structure composition
The needle: the core component, responsible for opening and closing the nozzle mouth.
Nozzle mouth: the channel for liquid outflow, with precise design to ensure uniform liquid distribution.
Drive system: a mechanical or electric system that controls the movement of the needle.
Control system: adjust dispensing parameters such as time, pressure and speed to ensure the best dispensing effect.
3. AXXON dispensing main application areas
Electronic manufacturing: such as PCB board dispensing, to ensure the firmness of components and the stability of circuits.
Medical equipment: precise bonding of tiny parts to ensure the reliability and safety of equipment.
Automotive industry: used for sealing and bonding to improve the performance and durability of automotive parts.
Optical components: ensure the precise assembly of optical devices to avoid impurities and errors.
4. AXXON dispensing advantages and features
High precision: able to control every drop of liquid dispensing, suitable for high-demand manufacturing processes.
High speed: fast dispensing process, improve production efficiency, suitable for large-scale production.
Wide compatibility: suitable for a variety of types and viscosities of liquid materials to meet different industrial needs.
Reduce waste: accurately control the amount of liquid used and reduce material costs.
5. AXXON dispensing purchase guide
Material and durability: choose nozzles made of high-quality materials to ensure that they are not easy to wear after long-term use.
Control system: Equipped with advanced control system, it can adjust multiple parameters to meet different dispensing needs.
Easy maintenance: The design is easy to disassemble and clean, reducing downtime and maintenance costs.
Brand and after-sales service: Choose a well-known brand to ensure reliable after-sales service and technical support.
6. Usage and maintenance suggestions
Regular inspection: Regularly check the wear of the striker and nozzle, and replace them in time.
Cleaning and maintenance: Clean in time after use to prevent residual liquid from clogging the nozzle.
Parameter calibration: Adjust the dispensing parameters according to different liquids and application scenarios to ensure the best effect.
Professional training: Operators should receive professional training and master the use and maintenance skills of the equipment.
7. Common problems and solutions
Blocking problem: When the nozzle is blocked, check whether there is any residue and use appropriate cleaning tools to clean it.
Uneven dispensing: Check whether the control system parameters are set correctly and adjust the pressure and speed.
Liquid leakage: Check the sealing of the nozzle and striker, and replace the seals if necessary.
8. AXXON dispensing technology innovation and development trend
With the development of industrial automation and intelligent manufacturing, AXXON dispensing needle nozzles are also constantly innovating. Future trends include:
Intelligent control system: integrating AI and sensor technology to achieve more precise dispensing control.
Highly durable materials: using new materials to extend equipment life and reduce maintenance costs.
Environmentally friendly design: reducing material waste and energy consumption, and improving the environmental performance of equipment.
9. Customer evaluation and feedback
Many customers have given positive comments after using AXXON dispensing needle nozzles. They believe that the equipment performs well in improving production efficiency, ensuring product quality and reducing production costs. At the same time, convenient operation and maintenance also make customers more satisfied.
Keywords and names of dispensing nozzle
1. Dispensing nozzle 2.Dispensing valve 3. High precision nozzle 4.Needle nozzle 5. Jetting nozzle 6. Fan nozzle 7. Dot nozzle 8.Corrosion-resistant nozzle 9. Wear-resistant nozzle 10.Stainless steel nozzle 11. Tungsten carbide nozzle 12. Ceramic nozzle 13. PTFE nozzle 14. Precision dispensing 15. Automated dispensing 16. Flow control 17. Adhesive viscosity 18. Dispensing accuracy 19.High-speed dispensing 20.Industrial dispensing 21. Electronic component dispensing 22. Automotive part dispensing 23. Medical device dispensing 24. Packaging dispensing 25. Maintenance 26. Replacement parts 27. Dispensing efficiency 28. Nozzle clogging 29. Dispensing system 30. Dispensing process
Nozzle: Dispensing nozzle, Dispensing tip, Needle tip, Precision nozzle, Glue nozzle, Adhesive nozzle, Dispensing head, Fluid nozzle, Fluid tip, Syringe tip, Jet nozzle, Valve nozzle, Dosing nozzle, Drip tip, Precision dispensing nozzle, Fine-tip nozzle, Spray nozzle, Dispensing applicator, Nozzle assembly, Non-drip nozzle.
Tappet: Dispensing tappet, Plunger, Pump tappet, Actuator, Dispensing piston, Syringe plunger, Dosing plunger, Pressure tappet, Piston tappet, Valve tappet, Fluid control tappet, Pneumatic tappet, Servo tappet, Dispensing pump plunger, Dosing pump tappet, Actuating rod, Precision tappet, Metering plunger, Drive rod, Displacement tappet
.jpg "MMG18029601 APJ1006 for AXXON dispensing nozzle needle seal")
.png)
.png)
skype
whatsapp
telegram
