MDV3020A, MDV3200A, MDV3200F, MDV3250 Nozzle Tappet seal for Vermes dispensing head
MDV3020A, MDV3200A, MDV3200F, MDV3250 nozzle tappet seals are used for Vermes dispensing. This page only shows some dispensing head parts. If you want to know the specific specifications and models, please contact customer service.
1、Below is the dispensing part number details for the MDV3020A, MDV3200A, MDV3200F, and MDV3250 nozzle tappet seals
vermes nozzle 1014157 N11-60 Corresponding tappet CTF/TTF 4-15, CTL15
vermes nozzle 1010343 N11-70 Corresponding tappet CTF/TTF 4-15, CTL15
vermes nozzle 1013254 N11-75 Corresponding tappet CTF/TTF 4-15, CTL15
vermes nozzle 1013255 N11-80 Corresponding tappet CTF/TTF 4-15, CTL15
vermes nozzle 1013129 N11-90 Corresponding tappet CTF/TTF 4-15, CTL15
vermes nozzle 1009837 N11-100 Corresponding tappet CTF/TTF 4-15, CTL15
vermes nozzle 1010344 N11-120 Corresponding tappet CTF/TTF 4-15, CTL15
vermes nozzle 1009838 N11-150 Corresponding tappet CTF/TTF 4-15, CTL15
vermes nozzle 1009839 N11-200 Corresponding tappet CTF/TTF 4-15, CTL15
vermes nozzle 1013024 N11-300 Corresponding tappet CTF/TTF 4-15, CTL15
vermes nozzle 1013025 N11-400 Corresponding tappet CTF/TTF 4-15, CTL15
vermes nozzle 1013444 N13-30 Corresponding tappet CTF/TTF 4-15, CTL15
vermes nozzle 1013443 N13-40 Corresponding tappet CTF/TTF 7-15, CTL15
vermes nozzle 1013378 N13-45 Corresponding tappet CTF/ TTF 7-15, CTL15
vermes nozzle 1012846 N13-50 Corresponding tappet CTF/ TTF 4-15, CTL15
vermes nozzle 1013393 N13-60 Corresponding tappet CTF/ TTF 4-15, CTL15
vermes nozzle 1013344 N13-70 Corresponding tappet CTF/TTF 4-15, CTL15
vermes nozzle 1011781 N13-75 Corresponding tappet CTF/TTF 4-15, CTL15
vermes nozzle 1013345 N13-80 Corresponding tappet CTF/TTF 4-15, CTL15
2、MDV3020A, MDV3200A, MDV3200F, and MDV3250 Dispensing Head Specification Number
VERMES MDV 3200F: (Order number 1012887)
VERMES MDV 3200F-HS: (Order number 1013143)
VERMES MDV 3200F-HS-UF: (Order number 1013287)
VERMES MDV 3200A-CA: (Order number 1012911)
VERMES MDV 3200A-CP: (Order number 1012852)
VERMES MDV 3200A-HS: (Order number 1012973)
VERMES MDV 3200A-HS-UF: (Order number 1012986)
VERMES MDV 3200A: (Order number 1012270)
VERMES MDV 3200A-AC: (Order number 1012902)
VERMES MDV 3200A-AC-UF: (Order number 1012865)
3、VERMES micro dispensing nozzles of various types, suitable for MDV3020A, MDV3200A, MDV3200F and MDV3250 dispensing systems
VERMES MDV N11: N11-60, N11-75, N11-80
VERMES MDV N13: N13-45, N13-80
VERMES MDV N17: N17-100
VERMES MDV N22: N22-100, N22-120
VERMES MDV N27: N27-100, N27-150
VERMES MDV N28: N28-300
VERMES MDV J09: J09-250, J09-300
VERMES MDV J10: J10-400
4、Dispensing nozzle and tappet manufacturing accuracy
Nozzle/tappet/screw hardware processing method: customized according to drawings or samples based on customer needs
Nozzle aperture accuracy can reach: 0.03mm
Nozzle finish can reach mirror surface: Ra0.1
Nozzle concentricity: 0.002mm
Nozzle hardness: 85-95 HR
Using temperature: -55 to 260 degrees Celsius
Processing method: precision grinding
Dispensing nozzle materials: tungsten steel, ceramics, diamond, carbide, stainless steel and other materials.
5、MDV3020A, MDV3200A Dispensing Nozzle needle N11
VERMES Order number 1010343N11-70
VERMES Order number 1013129N11-90
VERMES Order number 1009837N11-100
VERMES Order number 1010344N11-120
VERMES Order number 1009838N11-150
VERMES Order number 1009839N11-200
VERMES Order number 1013024N11-300
VERMES Order number 1013025N11-400
6、MDV3200F and MDV3250 Dispensing head nozzle N13
VERMES Order number 1013444N13-30
VERMES Order number 1013443N13-40
VERMES Order number 1012846N13-50
VERMES Order number 1013393N13-60
VERMES Order number 1013344N13-70
VERMES Order number 1011781N13-75
VERMES Order number 1013345N13-80
7、MDV3200F, MDV3020A, MDV3200A Dispensing head nozzle N14
VERMES N14-250 Order number 1013055
VERMES N14-300 Order number 1012097
VERMES N14-400 Order number 1012098
VERMES N14-1200 Order number 1012901
8、Micro Vermes Dispensing System - MDS 3200 Series
1. Main advantages
High speed: opening and closing of the valve with a maximum needle lift frequency of more than 3000 Hz (depending on the application and the medium), up to 1000 Hz.
Versatile: Freely adjustable parameter settings allow the jet properties to be customized according to the properties of the dispensed fluid. The electronic control unit allows the dispensing parameters to be changed without delay. Also suitable for low-viscosity or medium-viscosity media (if the tappet is changed frequently or the dispensed amount is very small).
High precision: High repeatability of the drop-to-dispense amount for media of all viscosities. Dispensing into cavities, grooves and irregular surfaces.
Suitable for high-viscosity fluids: The system converts the force of the latest generation of piezoelectric ceramics through a complex mechanical structure and can eject the highest viscosity media with a pressure of up to 1.000 bar.
Flexible: The modular design of the MDS 3200 allows the user to configure it for a wide range of applications. You can adjust the same system to very different process and fluid parameters by simply replacing a few parts. You can use a variety of different nozzle units to handle a wide range of media and dot sizes. For optimal performance, you can choose from different tappet geometries. You can choose from several different component materials, resulting in almost unlimited media compatibility.
9、Vermes Applicable Fluids
MDS 3200 is an all-around system for medium and high viscosity media. It is suitable for the application of various fluids, such as: SMT adhesives, filled conductive glue, silver conductive glue, solder paste, flux, silicone, LED-phosphor, bottom filling materials, hot melt adhesives.
10、 Vermes Application Examples
These include micro dispensing applications in the following fields:
Automation
Electronics
Mechanical Engineering
Vehicle Electrical
Medicine
Pharmacy
Information Technology
Consumer Electronics.
11、vermes Micro Dispensing System - Types of Nozzle Inserts
Nozzle Inserts for the MDS 3000 Series and the MDS 1000 Series
1、vermes N-Type Nozzle Insert
N-Type Nozzle Inserts are the most commonly used NIs. There are a number of different models to choose from.
Description:
Dispensing is done generally close to the substrate
It allows a wide range of parameter settings
Easy to handle
Many different nozzle insert shapes and sizes are available
Several variations of the inner channels (step bores, conical bores) are available
The nozzle insert is offered in 1.75 to 4 mm lengths
The customer can choose orifice diameters from 30 to 1200 μm
Precision machined, meeting exact specifications
Reusable nozzles reduce changeover time in the production line as well as waste of consumables
The nozzle inserts deliver precise deposit control in complex applications, such as LED potting, under fills, fine-line bonding, edge sealing
Serial number laser marked include lot numbers for process control and traceability
Reduced back pressure to ensure full deposit
Longer dispense life, even when used to dispense abrasive, particle-filled materials
Achieves deposits as small as 50 μm for critical applications
12、vermes J-Type Nozzle Insert
J-Type Nozzle Inserts are mainly used for long distance dispensing and dispensing into cavities or grooves. There are a number of different models to choose from.
Description:
Dispensing can be carried out from longer distance to substrate
Wide variety of forms and sizes are available
Variations in the inner channels of the nozzle insert (Step bores, conical bores available)
Dispenses into cavities or grooves or works around other kinds of barriers
The customer can choose orifice diameters from 30 to 1200 μm
Double and single tapered outer counters
Possible of dots, lines, or special patterns while reducing fluid stringing or tailing tendencies
Nozzle inserts deliver precise deposit control in complex applications, such as LED potting, under fills, fine-line bonding, edge sealing
Serial number laser marked include lot numbers for process control and traceability
The long tube design allows for fluids to be easily dispensed into hard to reach areas which conventional dispense tips cannot reach
13、vermes C-Type Nozzle Insert
C-Type Nozzle Inserts are made of PEEK and other stainless materials and are therefore perfect for low viscous media dispensing of medical and pharmaceutical applications.
Description:
C-type nozzle inserts are a combination of the materials PEEK and HM and have a stainless cannula
Each stainless steel tip consists of a precision stainless steel cannula
Dispensing can be carried out from a longer distance to the substrate
Mostly suitable for the low viscous materials
The metal free nozzle inserts are perfect for applications in the medical industry
14、vermes P-Type Nozzle Insert
P-Type Nozzle Inserts are the solution for side angle dispensing applications.
Description:
P-type nozzle inserts are made of a combination of metal and plastics
This nozzle insert type is perfect for a side angle dispensing (90°, 80°, 70°)
The P-type provides low cost and interchangeable inlays
15、O-rings, Sealings and Sealing Materials
The modular design of the systems of both the MDS 3000 and the MDS 1000 series allows it for them to be fitted in a very short time for a wide range of applications. Together with the different valves, fluid boxes, nozzle units, nozzle inserts and tappets the resilience of the sealings and sealing materials plays an important role in the choice of system components.
16、The tappets and nozzle of dispensing systems are usually made of a variety of materials. Each material has its specific advantages. Common materials include
Tappet material:
1. Stainless steel tappet: Stainless steel tappet has good corrosion resistance and mechanical strength, and is suitable for most general dispensing tasks.
2. Carbide tappets, tungsten steel tappets, diamond tappets, and ceramic tappets: usually have higher wear resistance and wear resistance, and are suitable for handling more wear-resistant materials or requiring long Time usage application.
Nozzle material:
1. Stainless steel nozzle: Stainless steel nozzle is corrosion-resistant and suitable for most general dispensing tasks. It is also commonly used to handle glue with higher viscosity.
2. Plastic nozzles: Plastic nozzles are lightweight and cheap, suitable for disposable or low-cost applications, but are not suitable for situations where high temperature or wear resistance is required.
3. Ceramic nozzles, carbide nozzles, tungsten steel nozzles, diamond nozzles: have excellent wear resistance and corrosion resistance, and are suitable for high-end applications dealing with corrosion-resistant or high-viscosity glue.
Brand application:
The usage of these dispensing machine tappets and nozzles covers multiple brands, some of the common brands include: Nordson EFD, VERMES, Techcon Systems, Graco, Asymtek, Fisnar, Musashi Engineering, Precision Valve & Automation, GPD Global, Techcon , there are also some Chinese brands of dispensing machine systems.
.jpg "MDV3020A, MDV3200A, MDV3200F, MDV3250 nozzle tappet seal for Vermes")
.png)
.png)
skype
whatsapp
telegram
