Vermes tappet seal 1010247 and 1013327 guide ring M-NBR 1013154
Due to the dispensing valve parts specifications are very varied, only part of the dispensing valve parts are displayed, if you need dispensing valve parts, please contact customer service to help you solve the problem. Thank you!
Ⅰ、Vermes series consumables include:
-
Spring energized seal 1007067 (U-shaped sealing ring)
-
O-ring 1009419 base sealing ring (PEEK retaining ring)
-
Metal guide ring 1013361
-
PEEK guide ring 1012273
-
Liquid box 1013168
-
PEEK liquid box connecting block 1010026
-
Nozzles: 0.05mm, 0.1mm, 0.15mm
-
Piston sealing ring
-
Dispensing valve diaphragm
-
Glue suction nozzle
-
PTFE guide sleeve
-
TTF15 firing pin, TTF10 firing pin, TTF7 firing pin, CTF10 firing pin, CTF7 firing pin
The modular design of Vermes MDS 3200A allows users to define configurations for various applications，Even for Low Volume High Mix Applications, the user can adjust the same MDS 3200A to very different process and fluid parameters:
-
Different nozzle sizes and shapes for different fluids and droplet sizes
-
Different tappet geometries for achieving optimum performance
-
Virtually unlimited material compatibility - all components in contact with the fluid chamber can be chosen from a list of different materials, one meeting your requirements
Ⅲ、Material:
UHMW-PE (Ultra High Molecular Weight Polyethylene) is a thermoplastic engineering plastic with excellent linear performance and high molecular weight, with a molecular weight of more than 1.5 million
It has low density, good wear resistance, self-lubricating, impact resistance, and corrosion resistance
This material seal is suitable for harsh conditions and can be adapted to the requirements of certain special media
Ⅳ、Service Life:
The service life of dispenser seals mainly depends on the use environment and the properties of the dispensed liquid，Generally, a pan seal made of high-quality materials can be used for thousands of hours or even longer
Specific service life is also affected by the following factors:
-
Operating frequency: Frequent use will accelerate the wear of the pan seal
-
Operating temperature: Too high or too low temperature may affect the elasticity and durability of the pan seal
-
Corrosiveness of dispensing liquid: Some highly corrosive liquids will accelerate the aging of the pan seal
Ⅴ、Temperature Range:
The temperature range of dispensing machine seals of different materials is different,The following are the approximate temperature ranges of some common materials:
-
Polytetrafluoroethylene (PTFE): -200℃ to +260℃
-
Silicone: -50℃ to +230℃
-
Fluororubber (FKM/Viton): -20℃ to +200℃
-
EPDM (ethylene propylene diene monomer rubber): -40℃ to +150℃
-
Polyurethane (PU): -30℃ to +80℃
.png)
.png)
skype
whatsapp
telegram
