JHIMS TWS earbuds Bluetooth Headset Glue Dispensing Machine

Product Number：DYS300

Product Usage：The main purpose of glue dispensers is to precisely apply glue or other adhesives in industrial production.

Applicable Industries：Glue dispensing machines are widely used in industries such as electronics, automotive, medical devices, and plastics to ensure precise bonding, sealing, and stability, enhancing product quality, durability, and reliability.

National Advisory Hotline：

+86 18975335491

Advisory

Product Details

TWS earbuds Bluetooth Headset Glue Dispensing Machine

The Bluetooth headset dispensing machine is a device specially used to manufacture Bluetooth headsets. Its principles, characteristics and advantages are as follows:

TWS_earbuds_Bluetooth_Headset_Glue_Dispensing_Machine

Ⅰ、Principle:

The basic principle of the Bluetooth headset dispensing machine is to use automated equipment to apply glue (or adhesive) to the components of the Bluetooth headset in a specified position and manner to ensure a firm connection and seal between the components. Specifically, it includes the following key steps:

1. Positioning and alignment: accurately positioning each headset component to a preset position.

2. Glue coating: applying glue or adhesive in a precise manner on a predetermined joint area or surface.

3. Curing and inspection: curing the applied glue (usually by UV curing or heat curing), and then performing a quality inspection to ensure that the glue is fully cured and the connection is firm.

Ⅱ、Features of Bluetooth headset dispensing machine:

1. Precise control: The dispensing machine can accurately control the amount and position of glue coating to ensure that the amount of glue used for each headset component is uniform and appropriate.

2. Efficient production: Automated dispensing machines can greatly improve production efficiency, reduce manual operations, thereby reducing production costs and increasing output.

3. Multifunctional application: It can be adjusted according to different models and designs of Bluetooth headsets to adapt to different production needs and process requirements.

4. Quality assurance: Through the automated glue coating and curing process, the quality stability and reliability of each Bluetooth headset can be ensured.

Ⅲ、 Advantages of Bluetooth headset dispensing machine:

1. Improve production efficiency and consistency: Automated operation can greatly improve production speed and consistency, and avoid the impact of human factors on product quality.

2. Cost saving: Reduce manual operation and scrap rate, reduce production costs, and improve product competitiveness.

3. Strong adaptability: It can adapt to the production of Bluetooth headsets of different specifications and models, and flexibly respond to changes in market demand.

Ⅳ、Specification Table:

model	DYS300
stroke	300/300/100（On-demand customization）
Programmatically	Teaching programming or graphics import
Movable graphic trajectory	Point, straight line, arc, full circle, curve, polyline, spiral, ellipse
Dispensing needle	Plastic needle/TT needle
Dispensing tube	3CC/5CC/10CC/30CC/55CC/100CC/200CC/300CC/500CC
Minimum discharge	0.01ml
Glue frequency	5 times/sec
Load	Y/X axis load	10kg
	Z axis load	5kg
Shaft speedX/Y/Z（mm）	0-600mm/sec
Decomposing ability	0.01mm/Axis
Repeatability（mm）	Screw drive	0.01-0.02
	Synchronous belt drive	0.02-0.04
Program recording mode	At least 100. 5000Points per group
Display method	LCD teaching box
Motor system	Japan micro stepping precision motor
Transmission mode	guide	Taiwan Shangyin Linear Guide
	Screw	Taiwan Silver Screw
	Belt	Italy Elate Synchronous Belt
	X/Y/Z axis synchronous belt is standard configuration, Z axis screw is optional, X/Y/Z axis screw is customized
Motion tweening function	3axis (any route in 3 three-dimensional space)
Input power	Full voltage AC110V-220V
External control interface	RS232
Motor control axis	3 axis
Axis dynamic range	X axis	300（Customized according to needs）
	Y axis	300（Customized according to needs）
	Z axis	100（Customized according to needs）
	R axis	（Customized according to needs）
Dimensions	730589630
Body weight	68kg

Ⅴ、Application areas:

1. Electronic manufacturing: Glue dispensing machines are used in circuit board manufacturing and packaging of electronic components. It ensures the precise positioning of electronic components and the uniform coating of glue, improving the quality and reliability of products.

2. Automobile industry: In automobile manufacturing, glue dispensing machines are used to fix parts such as headlights, dashboards and interior decoration. It ensures the sealing and stability of parts 1.

3. Medical device manufacturing: Glue dispensing machines play a key role in the assembly of medical equipment. For example, it is used to assemble syringes, pacemakers and artificial joints to ensure the sealing and stability of the equipment.

4. Plastic products: Glue dispensing machines are used to bond, encapsulate and fill various plastic products to improve the durability and aesthetics of products

Glue Dispensing Machine Hot Tags:

Stirring dispenser, solder paste dispenser, inner ring product automatic dispenser, peristaltic quick-drying glue dispenser, electronic cigarette oil injection machine, automatic squeegee machine, butter dispenser, razor head dispensing machine Material all-in-one machine, flexible packaging silicone dispenser, 4 types of glue dispensers, floor-standing visual dispensers, dual-platform visual dispensers, gantry-type visual dispensers, CCD hot melt glue dispensers, thread dispensers Machine, circular dispenser

Tag: JHIMS TWS earbuds Bluetooth Headset Glue Dispensing Machine

Previous：没有了

Next：JHIMS Multi head epoxy glue dispensing machine