PCB connector dispensing machine

Product Number：SPT-300

Product Usage：PCB connector dispensing machines are used to accurately dispense glue on connectors in electronic manufacturing to improve stability, waterproof and dustproof, and electrical insulation performance.

Applicable Industries：Communication equipment: such as dispensing of motherboard connectors of mobile phones, routers, etc. Computer hardware: such as dispensing of motherboard connectors of laptops, desktops, etc. Consumer electronics: such as dispensing of main control board connectors of TVs, audio equipment, etc. Industrial control equipment: such as dispensing of control panel connectors of industrial automation equipment.

National Advisory Hotline：

+86 18975335491

Advisory

Product Details

PCB connector dispensing machine

PCB connector dispensing machine is a device used for precise dispensing of connectors on electronic circuit boards (PCBs). It is usually used to apply glue to the pins or interfaces of the connector to enhance the stability of the connection, prevent short circuits on the circuit board, and improve the reliability of the overall electronic products. The following is a detailed introduction to the PCB connector dispensing machine: 1. Working principle of the dispensing machine The PCB connector dispensing machine uses a precise control system to apply glue in precise amounts to the specified position of the connector. Its main working process is as follows: 2. Glue supply system: Glue is usually stored in a specific glue barrel or hose and supplied to the nozzle part of the dispensing machine by pressure or peristaltic pump. 3. Control system: The dispensing machine is equipped with a precise control system that can adjust the flow rate of glue, the speed and pressure of glue spraying to ensure that the glue is evenly and accurately applied to the specified position of the connector. 4. Motion system: The connector is placed on the dispensing machine workbench, and through the precisely controlled motion system (usually the movement of the X, Y, and Z axes), it ensures that the nozzle can accurately align with each position of the connector for dispensing. 5. Nozzle design: The nozzle usually has a small aperture to ensure that the glue can be sprayed evenly, and the flow rate and spray angle of the glue can be controlled.

1、 Main features and functions

The main features and functions of the PCB connector dispensing machine include:

1. Accurate dispensing: The amount and position of the glue can be accurately controlled to ensure high-precision dispensing on small and complex connectors.

2. Multi-axis motion control: Through the multi-axis motion system, the nozzle can be accurately moved in three-dimensional space to adapt to connectors of different shapes and sizes.

3. Automated operation: It can realize the automated dispensing process and improve production efficiency and consistency.

4. Glue management system: Sometimes equipped with a glue temperature control system or a function to prevent glue from curing, ensuring that the glue remains in an ideal state when it is sprayed.

5. Programmable control: The dispensing machine is usually equipped with a user interface, which can be operated by preset programs or programming to adapt to different dispensing needs and connector designs.

2、Specification Table:

model	SPT-300
stroke	300/300/100（On-demand customization）
Programmatically	Teaching programming or graphics import
Movable graphic trajectory	Point, straight line, arc, full circle, curve, polyline, spiral, ellipse
Dispensing needle	Plastic needle/TT needle
Dispensing tube	3CC/5CC/10CC/30CC/55CC/100CC/200CC/300CC/500CC
Minimum discharge	0.01ml
Glue frequency	5 times/sec
Load	Y/X axis load	10kg
	Z axis load	5kg
Shaft speedX/Y/Z（mm）	0-600mm/sec
Decomposing ability	0.01mm/Axis
Repeatability（mm）	Screw drive	0.01-0.02
	Synchronous belt drive	0.02-0.04
Program recording mode	At least 100. 5000Points per group
Display method	LCD teaching box
Motor system	Japan micro stepping precision motor
Transmission mode	guide	Taiwan Shangyin Linear Guide
	Screw	Taiwan Silver Screw
	Belt	Italy Elate Synchronous Belt
	X/Y/Z axis synchronous belt is standard configuration, Z axis screw is optional, X/Y/Z axis screw is customized
Motion tweening function	3axis (any route in 3 three-dimensional space)
Input power	Full voltage AC110V-220V
External control interface	RS232
Motor control axis	3 axis
Axis dynamic range	X axis	300（Customized according to needs）
	Y axis	300（Customized according to needs）
	Z axis	100（Customized according to needs）
	R axis	（Customized according to needs）
Dimensions	730589630
Body weight	68kg

3、The main advantages of PCB desktop glue dispenser are as follows:

1. Chinese handheld LCD screen operation, easy to learn programming;

2. Support drawing points, lines, surfaces, arcs, irregular curve interpolation and other functions;

3. Can realize 3D non-planar trajectory path;

4. Support array, graphical browsing, three-dimensional ellipse, common library insertion, group editing and other advanced functions;

5. Glue amount, trajectory thickness, glue speed, glue dispensing time, glue stop time can all be set by parameters;

6. Large program capacity, can store 100 programs, 400,000 points of memory capacity;

7. Can be equipped with jigs, various glue guns and controllers, heating and temperature control devices, etc.;

8. A variety of glue dispensing heads can be selected, and multiple points can be operated at the same time, which doubles the work efficiency.

PCB connector dispensing machine name

Stirring dispenser, solder paste dispenser, inner ring product automatic dispenser, peristaltic quick-drying glue dispenser, electronic cigarette oil injection machine, automatic squeegee machine, butter dispenser, razor head dispensing machine Material all-in-one machine, flexible packaging silicone dispenser, 4 types of glue dispensers, floor-standing visual dispensers, dual-platform visual dispensers, gantry-type visual dispensers, CCD hot melt glue dispensers, thread dispensers Machine, circular dispenser

Tag: PCB connector dispensing machine

Previous：LED lens Vibratory feeder

Next：Nordson Musashi Dispensing Nozzle Needle Seal Parts