JHIMS | Small AB two component epoxy dispensing machine

Product Number：SZF-600

Product Usage：AB two-component dispensing machine is a device used to mix two-component adhesives (such as epoxy resin, polyurethane, etc.) in precise proportions and evenly apply them to the target surface.

Applicable Industries：Electronics manufacturing: used for coating component packaging on circuit boards, chip bonding, LED packaging, etc. Automotive industry: used for bonding, sealing and coating of automotive parts, such as headlights, dashboards, etc. Medical equipment: used for assembly and bonding of medical devices, such as syringes, diagnostic equipment, etc. Construction industry: used for bonding and sealing of doors, windows and curtain walls.

National Advisory Hotline：

+86 18975335491

Advisory

Product Details

Small AB two component epoxy dispensing machine

Small_AB_two_component_epoxy_dispensing_machine

Ⅰ、Working principle of small AB two component epoxy dispensing machine

Feeding: A and B components are stored independently.

Proportion control: The ratio of A and B components is precisely adjusted.

Mixing: Mixing by mixer before dispensing.

Dispensing: The dispensing position and amount are controlled by programming.

Automation: The control system automatically completes the dispensing process.

Cleaning: The equipment can be cleaned to prevent the glue from curing.

Ⅱ、Features

Y-type needle-controlled rubber valve, the glue is cut off without any wire drawing

Automatic dispensing, automatic unloading

There is no big end at both ends, uneven connection, etc.

Compatible with 10:1, 1:1, 2:1 AB glue mixed dispensing

Continuous dispensing function for irregular curves such as arbitrary points, lines, surfaces, arcs, etc.

A variety of dispensing needles, syringes, and dispensing valve controllers to meet different needs

With refrigeration function effectively delay the curing time of AB glue

Ⅲ、Specification Table:

model	SZF-600
stroke	600/600/500/500/100/100（On-demand customization）
Programmatically	Teaching programming or graphics import
Movable graphic trajectory	Point,straight line, arc, full circle, curve, polyline, spiral, ellipse
Glue ratio	1：1、2：1、4：1、5：1、10：1Double liquid structure frame
Dispensing method	Mechanical valve + Y-type needle
Cooling method	Vortex tube refrigeration
Glue frequency	5 times/sec
load	Y/X axis load	10kg
	Z axis load	5kg
Axis moving speed X/Y/Z (mm)	0-600mm/sec
Decomposing ability	0.01mm/Axis
Repeat positioning accuracy (mm)	Screw drive	0.01-0.02
	Synchronous belt drive	0.02-0.04
Program recording mode	At least 100. 5000Points per group
Display method	LCD teaching box
Motor system	Japan micro stepping precision motor
transfer method	guide	Taiwan Shangyin Linear Guide
	Screw	Taiwan Silver Screw
	Belt	Italy Elate Synchronous Belt
	X/Y/Z axis synchronous belt is standard configuration, Z axis screw is optional, X/Y/Z axis screw is customized
Motion tweening function	3axis (any route in 3 three-dimensional space)
Input power	Full voltage AC110V-220V
External control interface	RS232
Motor control axis	6 axis
Axis dynamic range	X axis	500
	X axis	500
	Y axis	600
	Y axis	600
	Z axis	100
	Z axis	100
Body weight	138kg