SMT Pick and place machine feeder

SMT Pick and place machine feeder

Non-standard custom label Funda (feeder)

Applicable model: aphonic labeling machine stickers and non-standard automation

Applicable materials: roll materials such as two-dimensional code label foam steel sheets and conductive tape

working principle

Stepping motor replaces the cylinder driver of conventional feeders, and the precision copper gear replaces the mechanical link drive. Connect the 24V secure power supply through a dedicated connector, the feeder receives the I / O signal of the machine to command the feeder to work.

Upgrade advantage

Electronic material model is widely available. 8mm compatible paper with tape packages. 1 mm / 2mm / 4mm step one-click switch. An AREED8MM Electric Fei Dha is used instead of the original three 8mm Tida; an AREED12MM Fei Da can be used instead of the use of 12mm and 16 mm.

Accuracy advantage

The drive motor is running a small amplitude of the cylinder to reduce the material offset due to vibration. High-precision feed gears are equipped with high precision motors to ensure that every feeding is accurate. The autonomous research and development of the Feeder calibrator can grab the X / Y coordinate value of each feeding, calculate the consistency of each Feeder feed accuracy of the CACP and CPK values.

Speed advantage

Feeling speed: Omron grating sensor quickly induction machine signal, independent development control motherboard software algorithm is more scientifically reasonable, stepping motor is equipped with acceleration gears, Feeder feed speed is exceeded.

Change line speed: stripping in front, self-contained film storage room; batch change does not need to be disassembled, and it is full of automatic opening reminders. In fact, it is true that non-stop compensation function, and the change efficiency can be increased by more than three times.

Compatible advantage

Suitable for all NXT Feeder platform machines on the market. The type I rail design is easy to up and down the feeder, and the tail lock is accurate. A 14PIN connector female, the host computer provides a power supply to establish a communication connection, and supports the feeder to feed back the error message to the host computer, support the tape feeder, tag feeder, and plug-in feeder multiple mixed.