JHIMS | AB Two component epoxy resin Glue Filling Machine
JHIMS | AB Two component epoxy resin Glue Filling Machine AB Two component epoxy resin Glue Filling Machine JHIMS_AB_Two_component_epoxy_resin_Glue_Filling_Machine

JHIMS | AB Two component epoxy resin Glue Filling Machine

Product Number:TZ-AB85402

Product Usage:The main purpose of a glue filling machine is to precisely inject adhesive into electronic components or modules to provide protection such as insulation, moisture, vibration resistance and heat dissipation.

Applicable Industries:LED display glue, LED energy-saving lamp glue, LED power glue, LED light strip glue, computer power glue, relay module glue, sensor glue, PCB board glue, solar panel glue, coil glue filling, soft light strip filling, point light source filling, surface column screen filling, Capacitors, Power Supplies, Transformers, High Voltage Packages, Ignition Coils, Ballasts, Inductor Coils, Circuit Boards etc.,

National Advisory Hotline

National Advisory Hotline:

+86 18975335491
  • Product Details
AB Glue Automatic Glue Filling Machine
        AB glue dispensing machine is a kind of equipment specially used for mixing and dispensing two-component glue (such as AB glue). It is widely used in electronic product packaging, LED lamp potting, power module packaging, handicraft manufacturing and other fields. The following is a detailed introduction of AB glue dispensing machine:
1、Working Principle
1、AB glue is loaded into AB two barrels respectively, AB barrels with the corresponding function to ensure that the glue is well stored;
2, through the two metering pumps for precision pumping glue, to ensure that the AB glue in accordance with the corresponding weight ratio of uniform glue;
3, and then through the mixing device, the AB glue for uniform mixing; Finally, through the robot editing the corresponding filling track, to achieve automatic alignment;
4、Through setting the corresponding amount of glue and the corresponding program to realize the automatic positioning and automatic quantitative gluing to meet the corresponding product gluing process.
 
2、 Main components
Storage tank: used to store A and B component glue, usually made of stainless steel or high-strength plastic to ensure corrosion resistance and long-term use.
Proportional pump: responsible for conveying A and B component glue according to the set ratio to ensure the precise mixing ratio of glue.
Mixing device: mix the two component glues evenly. Common mixing devices include static mixers and dynamic mixers.
Dispensing head: accurately point the mixed glue to the specified position through a precision control system, suitable for products of different shapes and sizes.
Control system: including human-machine interface (HMI), PLC controller, etc. Users can set parameters such as dispensing amount, mixing ratio, working speed, etc. through the control panel.
 
3、Features
1. Chinese operation interface, simple and easy to learn, professional error correction and foolproof design
2. Powerful lesson editing operating system, which can store multiple sets of data, and improve the programming time for line change
3. The three-axis platform can be customized to realize contact and quick glue filling, without jitter, and improve stability
4. The glue output ratio, time, speed, amount of glue, easy to set
5. Adjustable instantaneous suction shut-off valve, good ratio, anti-drawing, glue dripping, and a new breakthrough in glue overflow
6. Precise wear-resistant metering gear pump, strong continuous glue output, can be customized
7. Automatically develop the speed servo dynamic mixing system to ensure uniform mixing and unique rotating seal design
8. Equipped with automatic pressure sensor, timing discharge function and automatic cleaning function
9. Multi-layer filter system for material barrel, and equipped with sensitivity liquid level sensor alarm system

 

4、Specification Table

model

TZ-AB85402

The scope of work

600(X)*300(Y)*100(Z)mm(customizable)

Maximum speed

300mm/sec

Proportioning accuracy

±2%

Spit out accuracy

±2%

Mixed ratio

100:100~100:20 or 100:20~100:10

Spit glue speed

1g/sec~15g/sec 5g/sec~30g/sec

Operational viscosity

<20000CPS

Measurement method

Stepper motor + gear pump/rotary plunger pump servo motor + piston pump

transfer method

Micro stepping motor + timing belt (optional servo motor + ball screw)

power supply

AC220V 50HZ 2.5KW

Machine size

2180(L)*1170(W)*1600(H)mm

weight

About 130kg

working environment

Humidity: 20-90%, temperature: 20-60℃

XYZ axis stepper motor

High-precision micro-stepping motor with driver

Tank mixing system

One set/two sets (optional)

guide

Taiwan TBI/Shanghai Bank

Static mixing valve

Optional dynamic mixing valve according to glue

High-precision metering pump

According to the glue, it can be equipped with gear pump or rotary plunger pump/piston pump

Metering motor

Stepping motor

Storage barrel

15L/30L/70L, optional vacuum deaeration or heating function

Hose

Teflon tube

Automatic glue filling software

Automatic research and development

Dynamic stirring detection system

Optional

Glue outlet pressure detection

Optional

Semi-automatic cleaning device

Optional

 
5、Application field
Electronic product packaging: such as packaging of electronic components such as mobile phones and computers to ensure their waterproof, dustproof and weather resistance.
LED lamp potting: used for LED light strips, bulbs, etc. to enhance their service life and performance.
Power module packaging: such as transformers, power adapters, etc., to provide electrical insulation and moisture protection.
Crafts manufacturing: such as crafts and accessories, to enhance their appearance and durability.
 
6、Selection Guide
When choosing an AB glue potting machine, the following factors should be considered:
Glue type and ratio requirements: Different AB glues require different ratios, and it is very important to choose a suitable ratio pump.
Dispensing accuracy requirements: Select the appropriate dispensing head and control system according to the size and complexity of the product.
Production scale: Select appropriate equipment specifications according to production volume to meet production needs.

 

Service Hotline:

+86 18975335491

online service
JING HE

Website QR Code

Shenzhen Jinghe Technology Co., Ltd. © 【Sitemap】 
Powered by MetInfo 5.2.7 © 2008-2025 MetInfo Inc.