Tappet and Nozzle for GKG AXXON dispensing - JHIMS
Product Number：Tappet and Nozzle for GKG and AXXON dispensing systems
Product Usage：Tappet and Nozzle for dispensing systems
Applicable Industries：Dispensing machine application industries include: 1. Electronic manufacturing industry 2. Automobile manufacturing industry 3. Medical device industry 4. Painting industry 5. Optical manufacturing industry 6. Electrical appliance manufacturing industry 7. Packaging industry 8. Food processing industry In these industries, dispensing machines are often used for precise micro-hole nozzle application, fixing, sealing and assembly work.
Since there are many types of nozzles and Tappet used in dispensing machines, and the brands of dispensing machine Nozzles and Tappet are also different,some product dispensing nozzles and Tappet are displayed on the website. If you want to know about the nozzle and Tappet or dispensing valve system you need,please click WhatsApp or Telegram to contact customer service staff.
Ⅰ Dispensing machine tappets and nozzles are used in the following types of dispensing systems:
1. Screw dispensing system: This type of valve is usually used for high-viscosity glue, such as silicone, epoxy resin, etc. The tappet and nozzle can be used to ensure continuous flow of glue and prevent the screw valve port from clogging.
2. Pressure dispensing system: Pressure dispensing valve is suitable for glue of general viscosity, such as some ordinary glues, sealants, etc. The tappet and nozzle ensure that the valve port is not blocked by glue and maintain an even flow of glue.
3. Negative pressure dispensing system: This type of valve is usually used for thinner glue or dispensing tasks that require higher precision. Tappets and nozzles help control the flow and stop of glue to ensure precise dispensing results.
4. Rotary dispensing system: Rotary dispensing valves are usually used in applications that require dispensing on complex curves or irregular surfaces. The tappet and nozzle help ensure a continuous flow of glue during rotation.
5. Magnetic valve dispensing system: Magnetic valve dispensing valve is suitable for dispensing tasks that require quick switching. The lifter and nozzle help keep the valve port clear to ensure proper operation of the solenoid valve.
6. Spray dispensing system: Spray dispensing valve is used for applications that require glue to be sprayed on large areas or irregular surfaces. The tappet and nozzle ensure the normal operation of the nozzle and prevent clogging caused by the solidification of the glue.
7. Rotary spray dispensing system: This type of valve is often used in applications that require a rotary spray of glue onto a cylindrical or spherical surface. The tappet and nozzle can ensure the smoothness of the nozzle and ensure even spraying of glue.
Ⅱ The following two pictures are the nozzle and the firing pin of the jet dispensing valve
Ⅲ Below is the parts assembly of the non-contact electric dispensing head. It is simple to operate and easy to learn.
Ⅳ Precision Tappet and Nozzles for Dispensing System advantages mainly include:
1. Non-contact injection: improves the accuracy and yield of dispensing, suitable for precision dispensing process.
2. High-speed spraying: can continuously operate high-frequency spraying glue, suitable for high-speed automated production lines.
3. Wide applicability: it can handle medium to high viscosity liquids and is suitable for a wide range of dispensing scenarios.
4. Precise control: by changing the driving voltage amplitude, frequency, duty cycle and other parameters, it realizes precise control of the glue droplet spraying performance.
5. Easy maintenance: simple structure, easy to disassemble and clean, reducing maintenance costs.
These advantages make the Dispensing System nozzle firing pin widely used in electronic manufacturing, LED packaging, medical equipment and other fields.
Ⅴ Introduction to precision tappets and nozzles
1.Precision tappets and nozzles for dispensing systems are divided into two types (contact nozzles and non-contact nozzles).
2.Non-contact nozzles are subdivided into pneumatic nozzles and piezoelectric nozzles.
This chapter describes pneumatic nozzles, in which the tappet is pushed by air pressure to hit the nozzle.
Ⅵ Different series of dispensing system tappets
Ⅶ Different series of dispensing system nozzle
Ⅷ Dispensing nozzle and tappet manufacturing accuracy
Dispensing nozzle/tappet/parts processing:customized processing according to customer needs
Material properties: hardness (HRA):91-93, bending strength (Kgf/mm2): 450, density (g/cm3): 14.10
The accuracy of the nozzle pores can reach: 0.025mm
The nozzle finish can reach mirror surface: Ra0.1
Nozzle roundness/concentricity: 0.002mm
The annual output of nozzles can reach: 500,000 pieces
Customized product parts: Processed according to drawings or samples
Delivery time: within 3 to 5 working days
Application of nozzle needle: Suitable for surface mount glue, conductive silver paste, LED phosphor glue, IC packaging glue, bottom filling glue, UV glue, red glue, grease, sealant, silicone, epoxy glue, surface coating glue, solder paste and other adhe
This site provides different brands of Tappet and Nozzles and supports product customization.The raw materials used are all high-hardness tungsten steel from Japan and the United States.
If all hardware parts cannot meet product requirements or have any problems, or are not genuine,or have poor material, etc., our company promises unconditional refunds and returns.
Ⅸ Working principle of Axxon non-contact electric dispensing head:
The piezoelectric valve of the dispensing machine is a device that uses the piezoelectric effect to control the flow of glue. It is usually composed of piezoelectric ceramic materials. When a voltage is applied, the piezoelectric ceramic deforms, changing the shape of the channel and controlling the flow of glue. The advantages of piezoelectric valves include high precision, fast response, and durability. The dispenser nozzle is the component connected to the piezo valve that actually sprays the glue. The design of nozzles usually considers factors such as the flow characteristics of the glue and the accuracy of glue application. Common nozzle types include diameter-adjusted nozzles, rotating nozzles, pneumatic nozzles, needle nozzles, etc. Choosing the appropriate nozzle type can meet different dispensing needs, such as fine dispensing, high-speed dispensing, large-area coating, etc.
Ⅹ The video shows: the dispensing valve system and the processing of hardware parts.
.png)
skype
whatsapp
telegram
